Firstly, Cut of the connector from the USB Socket, and strip back
|
|
Next, strip cut the new extension lead and stri[ back the outer plastic leaving the braid exposed.
|
|
Now strip off most of the braid, just leaving a little bit behind, twist that together.
|
|
Now cut back the inner cores, leave the yellow one short but not too short, strip and tin the remaining connectors.
|
|
Do the same to the USB Cable.
|
|
Solder the wires together, green to green, red to red etc.If you dont have the same colours, then ummm... I dont know!
|
|
Put tape around each of the cores, and then tape it all together, leave the braid to one side for now.
|
|
Finally solder the braid together, use a decent amount of solder so that the connection has some strength and put a final covering of tape on the cable.
|
|
Job done! You'll have to take my word for it as the photo can't prove it!
|
|